Samruddhi Industries

D Colony, Ahmedabad, Gujarat

GST No. 24ALFPP1516Q1ZU

Send Email
0804604160682% Response Rate
Search

Home » Product Range » PI TAPE USA


PI TAPE USA

We  r importer of pi tapes curcumfrence gauge . 

15-50 Pi Tape USA Stainless Steel

REQUEST CALLBACK

15-50 Pi Tape USA Stainless Steel
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
BrandUSA
Size15-50mm
Tape Length15-50mm
Tapes TypeStainless Steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

We are instrumental in providing our valued clientele a very excellent quality range of Pie Tape. The entire range of our tapes is thoroughly tested on several quality parameters to ensure flawless range reaches our patrons. Our offered range is known for its finest and excellent quality and offered at industries most leading and reasonable price.

Features:

  • Dimensionally accurate
  • Precise design
  • Timely delivery
  • Custom made

 

Special tapes to measure outside and inside diameter tapes, linear rule, Go/No-Go tapes, and custom specialty tapes for measuring O-rings and inside diameters of other soft-walled parts.

 

Ask for Price
Yes! I am interested

600-900 Pi Tape USA Stainless Steel

REQUEST CALLBACK

600-900 Pi Tape USA Stainless Steel
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 16,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size600-900mm
Tape Length600-900mm
Tapes TypeStainless steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents 1mm of diameter, while each line on the vernier represents .05mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero) In this example, the value is 80mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 4 (0.40mm). Finally, to obtain the diameter of the object, simply add the two values together: 80mm + .40mm = 80.40mm. If no line on the vernier lines up exactly, an extension of .05mm can be made to .025mm by interpolating the distance between vernier lines. Direct Inside Diameter tapes are not available in this style. This Pi Tape® gage is guaranteed ± .06mm accuracy.

Care:
Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Yes! I am interested

900-1200 Pi Tape USA Spring Steel

REQUEST CALLBACK

900-1200 Pi Tape USA Spring Steel
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 11,000 / PieceGet Latest Price

Product Brochure
Product Details:
BrandPI TAPE USA
Size900-1200mm
Tape Length900-1200mm
Tapes TypeSpring Steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents 1mm of diameter, while each line on the vernier represents .05mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero) In this example, the value is 80mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 4 (0.40mm). Finally, to obtain the diameter of the object, simply add the two values together: 80mm + .40mm = 80.40mm. If no line on the vernier lines up exactly, an extension of .05mm can be made to .025mm by interpolating the distance between vernier lines. Direct Inside Diameter tapes are not available in this style. This Pi Tape® gage is guaranteed ± .06mm accuracy.

Care:
Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Yes! I am interested

900-1200 Pi Tape USA Stainless Steel

REQUEST CALLBACK

900-1200 Pi Tape USA Stainless Steel
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 17,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size900-1200mm
Tape Length900-1200mm
Tapes TypeStainless Steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents 1mm of diameter, while each line on the vernier represents .05mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero) In this example, the value is 80mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 4 (0.40mm). Finally, to obtain the diameter of the object, simply add the two values together: 80mm + .40mm = 80.40mm. If no line on the vernier lines up exactly, an extension of .05mm can be made to .025mm by interpolating the distance between vernier lines. Direct Inside Diameter tapes are not available in this style. This Pi Tape® gage is guaranteed ± .06mm accuracy.

Care:
Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Yes! I am interested

300-600 Pi Tape USA Stainless Steel

REQUEST CALLBACK

300-600 Pi Tape USA Stainless Steel
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size300-600mm
Tape Length300-600mm
Tapes TypeStainless Steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents 1mm of diameter, while each line on the vernier represents .05mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero) In this example, the value is 80mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 4 (0.40mm). Finally, to obtain the diameter of the object, simply add the two values together: 80mm + .40mm = 80.40mm. If no line on the vernier lines up exactly, an extension of .05mm can be made to .025mm by interpolating the distance between vernier lines. Direct Inside Diameter tapes are not available in this style. This Pi Tape® gage is guaranteed ± .06mm accuracy.

Care:
Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Yes! I am interested

600-900mm Pi Tape Spring Steel

REQUEST CALLBACK

600-900mm Pi Tape Spring Steel
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,800 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size600-900mm
Tape Length600-900mm
Tapes TypeSpring Steel
Usage/ApplicationIndustrial
Accuracy+- .06mm

Pi tape Precision Outside Circumference Tapes are available in the Blue Easy to Read material (as shown). Standard tapes are manufactured with a 1/4" wide Vernier Gage, a 1/2" wide Main Body and a 1/4" wide Gage Member. The standard thickness is .010" with an accuracy of ± .005" up to 120". Calibration Report traceable to N.I.S.T. is furnished with each new tape at no additional charge. Pietape calibration lab is compliant with ANSI/NCSL Z540-1-1994, ISO/IEC 17025, ISO 10012-1, former MIL-STD 45662A and 10CFR21.

Larger sizes and special widths can be manufactured to suit your requirements
Yes! I am interested

15-50MM Outside Diameter Pi Tape Spring Steel

REQUEST CALLBACK

15-50MM Outside Diameter Pi Tape Spring Steel
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationIndustrial
MaterialSteel
Min Outside Diameter15 mm
Max Outside Diameter50 mm
ApplicationsIndustrial,Commercial
Packaging TypeBoxes
Product TypeTape
Accuracy+- .06mm

Pi Tape brand Blue Easy to Read tapes are constructed of 1095 Spring Steel and are intended for use in low-light environments. They differ from pietape standard tapes by featuring a higher contrast facing of white lines and numerals on a dark blue background. They are delivered with a Calibration Report traceable to the National Institute of Standards and Technology.

The Blue Easy to Read tapes are best used for measuring diameters in low-light environments. They are not intended for use with chemicals or in corrosive environments.

Yes! I am interested

300-900 Pi Tape USA Spring Steel

REQUEST CALLBACK

300-900 Pi Tape USA Spring Steel
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 12,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size300-900mm
Tape Length300-900mm
Tapes TypeSpring Steel
Usage/ApplicationIndustrial
accuracy+- 0.06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents 1mm of diameter, while each line on the vernier represents .05mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero) In this example, the value is 80mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 4 (0.40mm). Finally, to obtain the diameter of the object, simply add the two values together: 80mm + .40mm = 80.40mm. If no line on the vernier lines up exactly, an extension of .05mm can be made to .025mm by interpolating the distance between vernier lines. Direct Inside Diameter tapes are not available in this style. This Pi Tape® gage is guaranteed ± .06mm accuracy.

Care

Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Yes! I am interested

28-300mm Pi Tape USA Stainless Steel

REQUEST CALLBACK

28-300mm Pi Tape USA Stainless Steel
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
BrandPI TAPE USA
Size28-300mm
Tape Length28-300mm
Tapes TypeStainless Steel
Usage/ApplicationIndustrial
Accuracy+- 0.06mm

Make certain the tape and object to be measured are both clean. Each line on the gage member represents 1mm of diameter, while each line on the vernier represents .05mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero) In this example, the value is 80mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 4 (0.40mm). Finally, to obtain the diameter of the object, simply add the two values together: 80mm + .40mm = 80.40mm. If no line on the vernier lines up exactly, an extension of .05mm can be made to .025mm by interpolating the distance between vernier lines. Direct Inside Diameter tapes are not available in this style. This Pi Tape® gage is guaranteed ± .06mm accuracy.

Care

Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
Yes! I am interested

28-300 mm Pi Tape USA Spring Steel

REQUEST CALLBACK

28-300 mm Pi Tape USA Spring Steel
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 9,790 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Tape Length28-300mm
Tapes TypeSpring Steel
Usage/ApplicationIndustrial
MaterialSteel
ModelPM2
ApplicationIndustrial
BrandPI TAPE

Precision Outside Diameter Tape

Specifications:

  • Pi-tape diameter tapes are manufactured to exacting standards in temperature controlled facilities at 68°F (20°C). The lines and numerals on our standard tapes are engraved and acid etched on a ground surface. The tapes have fixed readings that do not require periodic adjustments.
  • Pie tape standard Imperial tapes (inches) read to 0.001" diameter with an accuracy of ±0.001" up to 144 inches.
  • Pie tape standard metric tapes (millimeters) read to 0.01mm diameter with an accuracy of ±0.03mm up to 3,600 millimeters.
  • Each Pi Tape brand precision measuring tape is delivered with a Calibration Report traceable to the National Institute of Standards and Technology and all calibrations are performed in accordance with ANSI/NCSL Z540-1-1994, ISO/IEC 17025, ISO 10012-1, MIL-STD 45662A and 10CFR, part 21.


Pi Tape® - the original precision diameter measuring tape.


Additional Information:

  • Delivery Time: READY STOCK
  • Yes! I am interested

    300-900 Pi Tape USA Stainless Steel

    REQUEST CALLBACK

    300-900 Pi Tape USA Stainless Steel
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 15,000 / PieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Piece
    BrandPI TAPE USA
    Size300-900mm
    Tape Length300-900mm
    Tapes TypeStainless steel
    Usage/ApplicationIndustrial
    Accuracy+- .06mm

    Make certain the tape and object to be measured are both clean. Each line on the gage member represents 1mm of diameter, while each line on the vernier represents .05mm. Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension. Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero) In this example, the value is 80mm. Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 4 (0.40mm). Finally, to obtain the diameter of the object, simply add the two values together: 80mm + .40mm = 80.40mm. If no line on the vernier lines up exactly, an extension of .05mm can be made to .025mm by interpolating the distance between vernier lines. Direct Inside Diameter tapes are not available in this style. This Pi Tape® gage is guaranteed ± .06mm accuracy.

    Care:
    Tape is delicate, handle with care. Keep tape clean and dry. After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment. * White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product. White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust. No periodic adjustments are needed. Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.
    Yes! I am interested

     
    X


    Explore More Products

    Reviews & Rating

    4.2/5
    ★★★★★★★★★★

    Reviewed by 68 Users

    • 5★51%
    • 4★22%
    • 3★12%
    • 2★0%
    • 1★15%
    • User Satisfaction
    • Response84%
    • Quality     85%
    • Delivery   87%

    Most Relevant Reviews

    M
    ★★★★★★★★★★
    22-September-22
    Madhusudan Kedia
    Jaipur, Rajasthan
    Product Name : Surface Comparator Elcometer
    Response
    Quality
    Delivery
    R
    ★★★★★★★★★★
    22-April-21
    Rajesh Chandra
    Jamnagar, Gujarat
    Excellent
    Response
    Quality
    Delivery
    B
    ★★★★★★★★★★
    05-August-20
    Bijender Kumar
    Ghaziabad, Uttar Pradesh
    Product Name : Plastic Tape
    Good
    Response
    Quality
    Delivery

    Contact via E-mail
    Contact via SMS
    Parag D. Patel (Proprietor)
    Samruddhi Industries
    No. 4-A, Shayona Center, Ground Floor, Near Memco Cross Road, D Colony
    Ahmedabad - 380025, Gujarat, India
    Call Us: 
    Call Response Rate: 82%
    Share Us :



    Home  |   About Us   |  Product Range  |  Site Map  |   Contact Us

    © Samruddhi Industries. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Samruddhi Industries