Press O Film Testex USA

Approx. Rs 2,400 / PieceGet Latest Price

Product BrochureProduct Details:

If a measurement with either coarse OR X-coarse tape is in the 1.5 to 2.5 mil (38 to 65um) window... take a 2nd reading with the OTHER grade. If BOTH reading are in the 1.5 to 2.5 mil (38 to 65um) window RECORD THE AVERAGE OF THE TWO READING THE AVERAGE OF THE TWO READING AS THE PROFILE.

Approx. Rs 2,400 / PieceGet Latest Price

Product BrochureProduct Details:

If a measurement with either coarse OR X-coarse tape is in the 1.5 to 2.5 mil (38 to 65um) window... take a 2nd reading with the OTHER grade.If BOTH reading are in the 1.5 to 2.5 mil (38 to 65um) window RECORD THE AVERAGE OF THE TWO READINGS AS THE PROFILE.

Approx. Rs 2,400 / PieceGet Latest Price

Product BrochureProduct Details:

If a measurement with either coarse OR X-coarse tape is in the 1.5 to 2.5 mil (38 to 65um)window... take a 2nd reading with the OTHER grade. If BOTH reading are in the 1.5 to 2.5 mil (38 to 65um) window RECORD THE AVERAGE OF THE TWO READING AS THE PROFILE.

??? Surface profile gauge or testex tapes can test surface roughness. Most commonly used testex tapes / press o films are popular as it can give permanent record of the surfaces as a proof of test.
  Place the Testex Tape (Press-O-Film) firmly on the blasted surface, apply moderate pressure with the burnishing tool, the replica has now been taken and can be measured using the snap gauge. Testing & Inspection can be done in three easy steps. Detailed procedure is furnished with testex kit or tapes.
  Testex Tape is supplied in a roll containing 50 tests and is available in four different grades to cater for different applications. The snap gauge is supplied in a carrying case with a burnishing tool.
  Paint applicators, inspectors and researchers for its simple operations and results prefers to use Testex tapes (Press-O-Film)
  Testex Tape (Press-o-film) complies with ASTM, NACE and SSPC methods measurement.
  ASTM- Reproducibility is given in ASTM Standard 4417-93 for both “X-coarse” and “coarse” grade replica tape. NACE- Standard RP0287-95 addresses the issue of accuracy of measurement, test results.
  SSPC- The Society for Protective Coatings, recommends a minimum of three measurements of profile per 100 square feet (10 square meters).
  ISO- International Organization for Standards- Draft Standard ISO8503-5 describes preparation of steel