|
We are engaged in manufacturing and exporting a comprehensive range of Surface Roughness Meter. It is used to measure the roughness, waves and primary profile with a wide measuring range. Moreover, this machine computes the vertical displacement between the road surface under the probe and the centre point of an imaginary line.
|
|
|
Rubert Surface Roughness Comparision ChartThis set consists of 30 comparison specimens, covering six commonly-used machining methods (6 turned, 6 end-milled, 6 horizontally milled, 6 surface-ground, 3 lapped, 3 reamed/drilled. A label gives the Ra values of each specimen in both metric and imperial units |
|
|
|
|
|
|
|
|
|
Surface Roughness Tester TR200We are engaged in manufacturing a comprehensive range of surface roughness tester that is acknowledged for its features like accuracy in measurement and durability. These pocket-size & economically priced equipment is manufactured utilizing high grade raw material, to make these in compliance with ISO and DIN standards. Our range is used for measuring a varied range that is suitable for most material, especially flat, outer cylinder and sloping surface material. This tester Feature external calibration at keyboard with both Ra and Rz parameters in one instrument. Available with rechargeable batteries and can work while charging, these are available in competitive prices. Technical Specifications : | Roughness Parameters | Ra, Rz, RY, Rq, Rt, Rp, Rmax, Rv, R3z, RS, RSk, Rmr Primary profile | | Assessed profiles | Roughness profile ® Rmr curve (material ration Mr. | | Profile recording magnification | Vv: 200x - 20000x Vh: 20x, 50x, 200x | | Measuring system | Metric imperial | | Display resolution | 0.001 µ m / 0.04 µ inch | | Display | LCD 128 x 64 dot - matrix, with Back light | | Dimensions of LCD | 50 x 30 mm screen Pickup stylus position indicator Battery level indicator | | Display Features | Direct display of parameters and profile Direct printing LCD brightness adjustment Auto-off after 5 minutes with auto - store Calibration through software | | Data output | RS 232, direct to printer TA 220S or PC | | Range | Ra, Rq: 0.01-40 µ m Rz, Ry, Rp, Rt, R3z: 0.02 - 160 µ m Rsm, RS: 2-400 µ m Rmr: 1-100% | | Cut off length | 0.25 mm / 0.8 mm / 2.5 mm | | Evaluation length | (1-5 cut-off (selectable) | | Tracing length | (1-5 cut-off) + 2 cut - off | | Digital filter | RC, PC-RC Gauss D-P | | Pick-up | Standard model TS 100, indicative, Diamond tip radius 5 µ m | | Bores form diameter | 6.0 mm, depth 15 mm (TS 100) | |
|
|
|
|
|
|
|
Surface Roughness GaugeWe are manufacturing surface roughness gauge. Our range of surface roughness gauge are available with the folllowing specifications and features: - Pocket-size & economically price
- Large measuring range suitable for most materials
- Measures flat, outer cylinder and sloping surface
- Both Ra and Rz parameters in one instrument
- Features external calibration at keyboard
- Standard conform to ISO and DIN
- Chargeable batteries, work while charging
Other Information:Delivery Time: Ready Stock Other Information - Delivery Time:
READY STOCK
|
|
|
|
|
|
|
|
|
|
Surface TesterWe are engaged in manufacturing a wide range of surface tester and surface roughness meter that are manufactured by keeping in mind the factors of cost, speed, and regular calibration. These machines are especially designed for calculating the vertical displacement between the road surface under the probe and the centre point of an imaginary line. Moreover, these can also be customized as per the application requirements. Technical Specifications | Roughness parameter | Ra, Rz | | Tracing length | 6 mm | | Tracing speed | 1.0 mm / sec | | Cut-off lengths | 0.25mm/0.8mm/2.50 mm | | Evaluation length | 1.25 mm/4.0 mm /5.0 mm | | Measuring range | Ra. 0.05 -10.0 µ m Rz - 0.1-50 µ m | | Accuracy | ± 15% | | Repeatability | < 12% | | Filter | RC analogue | | Pick - up | Piezoelectric | | Stylus tip | Diamond, radius 5 ± 1 µ m Angle : 90° (+5° or - 10°) | | Operating Temperature | 0-40 °C | | Relative Humidity | < 80 % | | Storing Temperature | -25°C - 60°C | | Vertilation | Grade 3 | | Power Supply | 3.6 V Li -ion battery | | Charger | DC 6V, 3 hours (recharging time) | | Dimensions (L x W x H) | 110 x 70 x 24 mm | | Weight | 200 g | |
|
|
|
|
|
| |
